Welcome to the NEW Infrared Training Forum. To view the old message board, please click here.World Class Infrared Training for Thermography Professionals


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Filming in high EMF area
12-16-2013, 10:32 AM
Post: #1
Filming in high EMF area
While trying to perform and inspection on a 13.8Kv 4.3MW generator I was having problems with the EMF off the generator scrambling my WiFi connection to the camera as well as corrupting the SD card on the camera. Due to the constraints of the bunker the generator is in there is no physical way to get the camera more than about 10ft from the generator. Does anyone have any experience with this and if so do you have any suggestions for getting uncorrupted images? I had to abandon trying to remotely capture the images and suit up in a 40cal arc flash suit and film manually.
Find all posts by this user
Quote this message in a reply
03-11-2014, 02:48 PM
Post: #2
RE: Filming in high EMF area
While not the same, we have a similar issue doing overhead work with our Ipad connected to the T640 camera where it loses connection to the Ipad in certain situations. I'm wondering if we have a similar issue to you possibly.

-mike
Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  High Temperature Emissivity ajspires 6 10,410 05-24-2013 08:34 AM
Last Post: acardoso

Forum Jump:


User(s) browsing this thread: 1 Guest(s)
Copyright © 1999-2012 FLIR Systems, Inc.