Welcome to the NEW Infrared Training Forum. To view the old message board, please click here.World Class Infrared Training for Thermography Professionals


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FLIR Research Studio with FLIR A6750
05-07-2020, 04:17 AM
Post: #1
FLIR Research Studio with FLIR A6750
Hi there,

I connected A6750 camera with FLIR Research Studio software. When i clicked on " Count" tab below the temp. scale at the right side, I was not able to find the Deg. C unit, only " count" is showing. Kindly anyone explain why its happening.
Find all posts by this user
Quote this message in a reply
05-11-2020, 07:39 AM
Post: #2
RE: FLIR Research Studio with FLIR A6750
(05-07-2020 04:17 AM)omprakash.mukherjee@gmail.com Wrote:  Hi there,

I connected A6750 camera with FLIR Research Studio software. When i clicked on " Count" tab below the temp. scale at the right side, I was not able to find the Deg. C unit, only " count" is showing. Kindly anyone explain why its happening.

Counts are an alternative unit to temperature, so degrees C should not be available. Cameras sometimes have alternative units to temperature, these include, counts, digital level, object signal, and others. These are sometimes used as they have a linear relationship to radiance, whereas temperature does not.

If you want temperature, select temperature.
Find all posts by this user
Quote this message in a reply
05-13-2020, 03:46 AM (This post was last modified: 05-13-2020 03:49 AM by omprakash.mukherjee@gmail.com.)
Post: #3
RE: FLIR Research Studio with FLIR A6750
(05-11-2020 07:39 AM)Bobberry Wrote:  
(05-07-2020 04:17 AM)omprakash.mukherjee@gmail.com Wrote:  Hi there,

I connected A6750 camera with FLIR Research Studio software. When i clicked on " Count" tab below the temp. scale at the right side, I was not able to find the Deg. C unit, only " count" is showing. Kindly anyone explain why its happening.

Counts are an alternative unit to temperature, so degrees C should not be available. Cameras sometimes have alternative units to temperature, these include, counts, digital level, object signal, and others. These are sometimes used as they have a linear relationship to radiance, whereas temperature does not.

If you want temperature, select temperature.

Hi there,

Thank you for your reply. Please note, the " temperature" option is missing in the Flir Research Studio software while playing with the camera. Is that the software issue?
Find all posts by this user
Quote this message in a reply
05-13-2020, 05:04 AM
Post: #4
RE: FLIR Research Studio with FLIR A6750
https://flir.custhelp.com
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)
Copyright © 1999-2012 FLIR Systems, Inc.